LIUZHOU LIAN UNITED KNIVES CO.,LTD.

Some tips of Using the Shearing Machine

LUK Time:2015-01-05 Read: machine knife
Make the shearing machine idle cycles for several cycles when starting it,to ensure cutting sheet metal in different thickness from thin to thick in the normal circumstances.In this way to ensure that users are familiar with shears performance.

  Make the shearing machine idle cycles for several cycles when starting it,to ensure cutting sheet metal in different thickness from thin to thick in the normal circumstances.In this way to ensure that users are familiar with shears performance.

  When doing the teat work, it shall be adjusted for different blade gap when shearing the different thickness.This will have an impact of the blades if the gap between of the blades are not coordinating.

  Turn on the gauge switch during the shearing processing, then observe the oil pressure when cutting 12mm plate, and the pressure should be less than 20MPa.Fllow the rules of the machine

  factory setting 20-22MPa.When you hear the noice during the shearing processing,stop to check.The shearing machine's temperature of fuel tank shall be less than 60 degrees,otherwise,it willturn off.

  If you want to know more about it, pls contact us, we are the machine knife manufacturer for many years.