LIUZHOU LIAN UNITED KNIVES CO.,LTD.

knife angle for paper cutting

Time:2017-03-22 Read: Steve
Of particular concern with the use of guillotine cutters is the angle at which the knife contacts the sheets. Average weight papers—such as writing paper or common printing papers—are accurately cut with a knife angle of 22o, but thinner or heavier papers may require smaller or larger angles, respectively. The clamp pressure also may be too high or too low, depending upon stock thickne

Of particular concern with the use of guillotine cutters is the angle at which the knife contacts the sheets. Average weight papers—such as writing paper or common printing papers—are accurately cut with a knife angle of 22o, but thinner or heavier papers may require smaller or larger angles, respectively. The clamp pressure also may be too high or too low, depending upon stock thickness. Experience and experimentation are the best indicators for these materials.

LUK guillotine knvies used for paper cutter such as Polar, Wohlenberg, Lawson, Schneider, etc.

Material: O7 and HSS tip.

Better sharp, better paprallim and holes position could be made and keep same quality in a long time.