LIUZHOU LIAN UNITED KNIVES CO.,LTD.

Circular Knives for Roll slitting soft material

 Circular Knives for Roll slitting soft material

 
Several methods are available for soft materials like plastic films and paper. Razor blades, straight, or circular blades are being used. Some blades cut through the material while others crush the material against a hard roll. Those are similar to knives and cut the material into narrow strips, which may be called coils when being rewound. The cutting blades can be set to a desired width. Some machines have many blades to increase the options of cutting widths, others have just a single blade and can be set to a desired location. The slit material is rewound on paper, plastic or metal cores on the exit side of the machine.
 
The process is used because of its low cost and high precision for mass production. Some machines have a program that monitors the blades and sharpens the blades often to maintain the quality and precision of the cut. Depending on the industry and the product that is being slit these machine can run between 10m/min (special metal webs) and 5000 m/min (paper making process). The machines can also incorporate extensive automation to precisely control material tension, automatically position the slitting knives, automatically align the cores onto which the material is wound and to reduce manual handling of the rolls.
 
Examples of materials that can be cut this way are: adhesive tape, foam, rubber, paper products, foil, plastics (such as tarps and cling wrap), glass cloth, fabrics, release liner and film.
 
Our knife including top slitting knives, dished knives, bottom knives and circular knives. 
in D2, M2, HSS and Carbide material.
 
1. In slitting circular knives, material is D2, M2. dimension as follow 
    62 x 40 x 1mm, 
    64 x  40 x1mm, 
    90 x 60 x 1.2mm, 
    100 x 65 x 1.2mm, 
    105 x 65 x 1.2mm,
    105 x 75 x 1.2mm, 
    130 x 100 x 1.5mm, 
    150 x 100 x 1.5 mm and so on 
    
2. For high quality paper rewinders blade, we produce circular blade in Tungsten Carbide. dimension as follow
    240 x 32 x 1.2mm
    250 x 150 x 1.2mm
    260 x 114 x 1.4mm
    280 x 160 x 1.5mm and so on. 
    
3. In high quality guillotine, we produce for Polar blade, Wohlenberg blade and Perfecta blade.